Window film is a thin sheet of plastic that can be applied to the inside or outside of windows. It is commonly used for privacy, reducing heat and glare, and protecting furniture from UV rays.

Applying window wrap is a simple and cost-effective way to improve your home’s energy efficiency and enhance its appearance. This article will review how to install window film and provide information on costs and tips.

Materials and Tools Needed for Window Installation


  •  Window film
  • A spray bottle filled with water and a few drops of dish soap
  • Squeegee or credit card
  • Cutting knife or scissors
  • Measuring tape
  • Paper towels
  • Hammer
  • Safety glasses

How to Apply Window Film?


Following are the window film installation instructions.

Step 1. Measure the Window

Before you begin, measure the width and length of your window. This will help you determine how much window wrap you need to cover the entire surface.

Step 2. Clean the Window

Using a mixture of water and dish soap, thoroughly clean the window where you plan to apply the film. Remove any dirt, dust, or residue from previous adhesives.

Step 3. Cut the Film

Using your measurements, cut the window film to fit the size of your window. Cutting the film slightly larger than the actual size of the window is recommended to allow for a more straightforward application.

Step 4. Apply Water and Soap Solution

This is a question that people ask: How to apply window film with water? Fill a spray bottle with water and add a few drops of dish soap.

Spray this solution onto the clean window surface. This will act as a lubricant to help you position and adjust the film.

Step 5. Position and Apply the Film

Carefully place the film onto the wet window surface, ensuring it is appropriately aligned. Use your hands or a squeegee/credit card to press out.

Step 6. Peel Off the Backing

Peel off about an inch of the backing from one side of the film. Be careful not to touch the adhesive side with your fingers, which can leave fingerprints and make it harder to apply smoothly.

Step 7. Trim the Excess Film

Once all the film is applied, use a utility knife or scissors to trim any excess film around the edges. Leave a slight overlap on each edge to ensure complete coverage.

Step 8. Remove the Extra Moisture

Use a clean, lint-free cloth or paper towel to remove any remaining moisture between the film and the window. This will help the movie adhere better and prevent it from peeling away.

Step 9. Let the Film Set

Allow the film to set for at least 24 hours before opening or closing the window. This will give the adhesive enough time to fully bond with the glass surface and prevent peeling or shifting.

What is the  Best Window Film for Home Windows?


Many different types of window films are available for home windows, each with unique benefits and features.

Some popular options include.

  1. Solar Control Window Film: This film is designed to reduce the heat and UV rays that enter through your windows, helping keep your home cooler and protecting furniture from fading.
  2. Privacy Window Film: A privacy window film can be a great option if you live in a busy area or have neighbors nearby.
  3. Decorative Window Film: Decorative window film is an excellent choice for those looking to add style or personality to their windows.
  4. Safety and Security Window Film: This film can help protect your windows from shattering during storms or break-ins.
  5. Energy-Saving Window Film: Consider using energy-saving window film to make your home more energy-efficient.

Tinted House Windows Pros and Cons


Tinted house windows have become increasingly popular as homeowners look for ways to improve their homes’ energy efficiency and privacy.

Tinted windows offer many benefits, but there are also some potential drawbacks to consider before investing.


  • Energy efficiency
  • Reduced glare
  • Increased privacy
  • Protection from UV rays


  • Initial cost
  • Professional installation
  • Limited flexibility
  • Potential for bubbles or peeling
  • Maintenance
  • Legal restrictions
  • Limited heat reduction

How Much Does the Window Film Installation Cost?

The cost of tinted window installation varies depending on the size and number of windows and the type of film used. On average, homeowners can expect to pay between $10 – $15 per square foot for professional installation.

This means a standard-sized house with ten windows could cost anywhere from $900 to $1600 for tinted window installation.

Number of windows Average cost
1-5 $200 – $600
6-10 $500 – $900
10-15 $1000 – $1400

Window Maintenance Tips


  1. Regular Cleaning: Use a mild soap solution and a soft cloth to clean the windows’ surface gently.
  2. Avoid Abrasive Cleaners: Harsh chemicals or abrasive cleaners can damage the film on your tinted windows.
  3. Check for Damage: It’s essential to regularly check your tinted windows for any signs of damage, such as peeling or bubbling.
  4. Be Careful with Window Treatments: If you have blinds, curtains, or other treatments installed on your tinted windows, be careful when opening and closing them.
  5. Don’t Use Ammonia: Ammonia-based cleaners are commonly used for cleaning glass but should never be used on tinted windows.
  6. Avoid Direct Sunlight: Tinted windows are designed to block out a certain amount of sunlight, but prolonged exposure to direct sunlight can still cause damage.
  7. Use Microfiber Cloths: Avoid using harsh materials like paper towels or sponges when cleaning your tinted windows.
  8. Regularly Inspect Your Windows: It’s essential to inspect your tinted windows regularly for any signs of damage or peeling.
  9. Seek Professional Help: If you notice any damage to your tinted windows or want to remove window tint, it’s best to seek help from a professional window tint installer.

Can You Install the Home Window Film by Yourself?


Installing home window film can be a DIY project, but it’s best to leave it to the professional Home window tint installer in McAllen for optimal results. Precise measurements and proper techniques are crucial when applying window films.

Additionally, some types of window films, such as security or decorative films, require specialized tools and skills that may be limited to the average person.

However, if you decide to install a home window film yourself, thoroughly read and follow the instructions provided by the manufacturer.


Installing window film on house windows offers many benefits, including enhanced privacy, reduced glare, and improved energy efficiency, making it a valuable upgrade for any home.

The process typically involves cleaning the glass surface, measuring and cutting the film, peeling off the backing, and carefully attaching the tint.

If you’re considering installing window film on your house windows, Tint-On-Wheels is here to help! Contact us at 956-682-2915 to benefit from our professional installation services.